 
MORE 'D' BLUES
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
MORE 'D' BLUES
- From: Lance Haslewood <lanceh@xxxx>
- Date: Thu, 13 Nov 2003 16:59:42 +1100
John & Group,
John, thank you for your input and advice. My problem is not 'water in the 
oil', but 'oil in the water'. The sump is completely free of water or 
condensation. I do not live in an area which experiences freezing 
conditions, so I guess I can rule-out freezing. I've had a few days to 
sleep on the matter and think of the possible causes. One of the 
possibilities I'm dreading is that the problem may be associated with 
corrosion. I dread the thought. I guess I'm hoping that a fault lies with 
the head/s gasket which should not be all that difficult to replace. Which 
ever way I go, I think that the heads are going to have to come off.
My DeLorean has low miles and sat in a museum for some years before I 
purchased it. I know for a fact that preventative maintenance on the car 
was basically non-existent while it was 'incarcerated'. Who knows how long 
the coolant sat unchanged in the engine during those museum years. I've 
owned the 'D' for about six years and have changed the coolant yearly, as I 
do with my other car. I have this gut-busting feeling that I'm in for a 
torrid and probably expensive time ahead.
Oh, since I've owned the car, I've used a filter sock in the cooling system 
and have been amased at the gunk it has trapped ..... another reason why I 
think it may be corrosion.
Lance.
Message: 23
Date: Wed, 12 Nov 2003 10:56:58 -0800
From: "John Hervey" <john@xxxx>
Subject: RE: MORE 'D' BLUES
Lance and Group, I got called over to a shop here in Dallas that an 81 was
getting water in the oil and the car had an oily smell. After a couple of
hours looking, we found the block was cracked in the square pockets below
the internal water pipe. After it was all cleaned up, it was welded and
everything is ok. Big scare for the customer but cost under $100.00 to have
an aluminum welder come over. My question or statement is, did water fill up
the holes or pockets and freeze and that was what cracked the block.
Would it be prudent to fill the holes with silicone or something to prevent
water from standing.
John Hervey
www.specialtauto.com
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN