Re: [DML] ? angle drive demise

["robert parker" <roberthparker@xxxx>]

Well..... after 21 years of faithful service, my angle drive is not 
co-operating. It began to work spasmodically (8-10 mi. then the needle 
bounces & dives to 0); so I pulled the cables, cleaned & lubed them, added 
lube to the angle drive, & it sort of worked. I could turn the a-d cable by 
hand, but would occ. notice a "catch" in the rotation. Spinning the tire 
fwd - no (lower) speedo cable response. Spinning BKWD I can feel the (lower) 
speedo cable turn in my fingers. Hmmm. So.... How does one get around 
the interfering brake line to get to angle drive; what size wrench removes 
it from the rotor; & what tips suggested for repair? I don't like having 
parts inoperative. I can also be contacted at e-mail as above. 
MUCH thanks in advance. Drive Stainless Robert # 6924 Sp Tag: 
AgBULIT