[DML] Re: Roof Light Disassembly

["Harold McElraft" <hmcelraft@xxxx>]

There are three wires. PW (purple/white) P (purple) and a B (Black). 
The best way to figure it out is to look on page 112 of thr 
Technical Information Manual. PW and B provide a ground. P is 
connected to one side of the bulb and the switch rocks between the B 
which is "on" and the PW which is a "delayed" grounding circuit. P 
is "hot at all times" through fuse 12.

Harold McElraft - 3354


--- In dmcnews@xxxxxxxxxxxxxxx, wmack <wmack@xxxx> wrote:
> Can someone explain which colored wires go where, for the light 
switch to 
> function properly?
> 
> Thanks
> Willie Mack
> Vin 5043
> 
> >===== Original Message From gw2tulsa@xxxx =====
> >The back light works fine. My plan was to outright switch them 
out since I 
> have no need for the rear light...
> >
> >Thanks for the info on removal. I figured it was something like 
that...
> >
> >-Gary
> >
> 
> [moderator snip]