Re: [DML] Roof Door seal replacement.How?

[Martin Gutkowski <webmaster@xxxx>]

Yes you need to drill those rivets out and buy a pop-rivet tool to 
install the new seals. You may decide they're more trouble than they're 
worth though.... I had to take my roof off to get my new ones in, and 
you must be very careful of the torsion bar the whole time. Headache.

Martin
#1458
#4426

netym89 wrote:

> When I bought my Delorean six years ago, I realized that after an 
> inspection, the rood door seal and the retaining plate were removed 
> by the previous owner. I found them in the trunk. Because it is held 
> in with rivets, I noticed that the rivets are in the door and I don't 
> know how to go about it. Must I drill them out and replace them with 
> new ones? Do I knock them into the door with a hammer?Not my first 
> choice. So here, anybody that has replaced these seals, I need to 
> hear from you because your advise will help me do it the right way.
> Talk to you soon.
> John
> 10250