 
Re: [DML] Torison Bar
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Torison Bar
- From: Samuel <samuel_yahoo@xxxx>
- Date: Fri, 01 Nov 2002 21:56:33 -0500
willinot wrote:
Firstly. If this is a stupid question I applogise. I dont 
currently own a DeLorean but hope to soon. 
After reading recent posts about the torsion bar breaking I started 
thinking if this could happen while in the car and penetrate the 
interior thus hitting the driver/passenger. As I said this may be a 
very stupid question but I dont know how the torsion bar operates or 
how it is fitted.
If you look at the following link,
http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=92&PageCat=8%2DFrame+and+Body
you'll see the torsion bar sits at the top of the door long ways. (from 
the front windshield to the back windshield). I was too lazy to dig up a 
real picture. If they snap, they are going to untwist so I dont think 
they are going to go thru the T roofing panel. As far as i'm aware, the 
passenger side bar still exists but the driver side one is no longer 
available from the various vendors. The ones that are left would have to 
be taken out of a current car.
Thanks.
Paul.
ps: on a general note. What does the term flaming mean when used 
about responding to posts.
Usually responding in such a way that either your temper or someone 
else's temper "goes off" so you end up in a yelling match.
Samuel
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN