Re: [DML] No Acceleration LOSS of power

[dherv10@xxxx]

Jim, If the control pressure in the fuel distributor allows the control 
plunger to rise or stick, then you will have this problem. If you know the 
fuel distributor is ok, then the control pressure regulator or also called 
the warm up regulator is the problem. You might want to also make sure the 
fuel injectors are ok and the fuel filter isn't stopped up.
John Hervey
www.specialTauto.com


<< CAR HAS BEEN IN LONG TERM STORAGE [mice got into the relay department 
and skinned a few wires---I repaired the wires with electrical tape 
and they appear to be OK.] Recently, I installed a new fuel pump 
system in the gas tank, a new rebuilt A/T transmission computer -
governer and new spark plugs. It still seems to LOAD UP when I try to 
accelerate and on steep up-hill grades it nearly slows to a stop! 
Could my problem be with the RPM fuel pump relay? Any suggestions 
would be appreciated! JIm Smith
>>