Re: [DML] Re: Manifold heat stove...

[Martin Gutkowski <webmaster@xxxx>]

Adam, it's most likely the heatshields on the top of the exhaust 
crossover pipe. NB they can feel tight even when they're not. I could 
not move them by hand, but only by enthusiastically thumping the pipe 
did I discover the rattle that had been driving me up the wall. In 
trying to undo the mounting nuts I discovered the one of the mounting 
brackets was broken on one side. I clamped the whole lot down with a big 
jubilee clip - it's a bit heath-robinson, but it works and nobody ever 
sees it.

Martin
#1458 & #4426

Adam wrote:

> I was wrong about the vibration sound: its back, exactly the same as 
> before I removed the heat stove. John thinks it may be a motor mount, 
> I will check it out tomorrow. 
>
> Adam