Re: [DML] Re: Radio Bracket reproduction (was: New Fuel Gauge Sending Units...)

[njp548@xxxx]

In a message dated 9/24/02 1:33:44 PM Eastern Daylight Time, jvdwouw@xxxx 
writes:

<< Over all the bracket is quite OK, but for $125,- I would 
have expected the front bit to at least be black.
The fit of all the holes and such was perfect,
allthough we had to elongate the DIN-slot about 3mm
to get the sleeve for mthe radio to fit properly. >>

Thats about how much I had to file on my DMC Houston bracket too when I did 
my radio swap back in February. I also noticed that the hole thats cut out 
for the a/c fan switch isn't cut right for some reason, and it makes the fan 
switch sit on an angle because the bottom part of the switch doesn't fit in 
the hole, its too large. Maybe thats just on my radio bracket?

Later,
Nick Pitello
1852
15914
<A HREF="Http://members.aol.com/njp548";>Http://members.aol.com/njp548</A>