Re: [DML] Flux Capacitor

[Robert Brandys <BobB@xxxx>]

JC WHitney sell the rubber seal for the plexiglass window. Much less 
expense. That's what I used. The NEMA enclosure from McMaster Carr is 
a standard size. Numerous electrical supply companies have the same 
size part with similar pricing.

BOB

mikedagoon wrote:

> Hello List,
> I was in the middle of making a flux capacitor awhile back myself.
> But, I was sidetracked and never finished it.
> Since this subject came up I would like to share where I purchased my
> electrical enclosure box from. It looks very similar to the one in 
> the film. 
> Except it didn't have the window. You have to cut it out yourself.
> And buy a piece of plexiglass. And the rubber trim is from a Jeep's 
> windshield which can be purchased from your local auto store or Jeep 
> dealership.
> This might be a cheaper but more realistic looking approach for the 
> do it yourselfer.
> If and when I do finish mine, I will post pics and give a list of 
> parts and sources I used.
>
> McMaster Carr Part #7847K15 Price was $51.91 Dimensions 12"x10"x5"
> www.mcmaster.com
>
> The Pics are in the photo section under Flux Capacitor.
> Good luck and have fun building it.
>
> Mike
> vin#1113
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/