Re: acceleration noise found! how to fix?? *heat stove*

["adam_one_million" <acprice1@xxxx>]

I think that www.pearce-design.com now has new manifold heat stoves 
available. I think they are made of stainless this time too. 

Adam Price



--- In dmcnews@xxxx, "tmpintnl" <tobyp@xxxx> wrote:
> Andy - It sounds like you are talking about the "heat stove" that 
> supplies hot air to the intake for cold start up. There was quite 
a 
> bit of chatter on the list about this part ... apparently it can no 
> longer be found. Somebody who is handy with "tin work" could 
> probably patch it back together, but you would have to get it off 
> first. The rusty studs, etc. could be a problem. You'll have to 
> decide how deep you want to go, considering the potential 
challenges 
> with sheared off studs, etc. There was also much talk on the List 
> about getting the manifolds off, so there might be some good ideas 
in 
> that thread. Good luck.
> 
> Toby Peterson VIN 2248
> Winged1
> 
> --- In dmcnews@xxxx, Soma576@xxxx wrote:
> > Hey all,
> >i think the noise i've heard upon accelerating from 2500-2900 RPM 
> >is a thin metal heatshield that goes over the pass side exhaust 
> >manifold. it is super rusty and loose because it looks like some 
> straps or mounts are broken.
> >