I just completed the job of lowering my car using the PJ Grady set up. All I can say after some short driving trips is "WOW"! The shocks are light years ahead of the tired OEM 20 year old items. The ride/handling is excellent and the car looks much better IMO. It no longer has the front high look and the tires/wheels fill the wheel well really nicely. I also performed a complete brake overhaul including new rotors. With that I have free for the cost of shipping: 2 OEM Front Springs (33K miles on the car at time of removal, same for rotors.) 3 Rotors (Can be cut again, I ordered all new ones blindly that I really didn't need.) The drivers side rotor was stuck because of a bad wheel bearing and took some "persuasion" to remove so it's pretty beat up. Both Cables for the emergency brake (THESE ARE BRAND NEW) My E-Brake only needed new pads and an adjustment. I bought them blind as well, my over anxiousness is your gain, I know I could probably just return them for credit but I'd rather help somebody out who might really need them. So if you are experimenting with cutting your own springs or have a need, contact me off list to arrange for shipping at haneydr(AT)ix.netcom.com. FIRST COME - FIRST SERVED. Daniel R. Haney vin 03254 882FUTR