Re: [DML] No Spark

[dherv10@xxxx]

Mike, Is there voltage going to the left side of the resistor. blue/yellow 
wire. If not, check for a loose connection on the solenoid, resistor, relay 
or a broken wire. If it's there then the voltage goes from the starter 
solenoid to the relay to the resistor. If all else fails and you have 
voltage, look for a bad resistor. You should have about 10.7 volts when 
starting. You can also by pass the resistor with the blue/yellow to start the 
car then back to the resistor. If it still doesn't get fire, you can check 
the coil, ECU and there is a pulse coil in the distributor. It could be shot.
John hervey
http://www.specialtauto.com/