Re: [DML] Brake Lights (again)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Brake Lights (again)
- From: jwit6@xxxx
- Date: Thu, 1 Nov 2001 20:50:52 EST
The green wire at the stop light switch under the dash should have 12V on it
all the time, independent of the ign switch position. There should also be
12V available at the fuse box for fuse #4 all the time. Fuse 4 gets
unswitched 12V from the white wire, then crosses the fuse and should go right
to the switch. If you've got 12V at the fuse, but nothing at the switch, it's
a connector problem bettween the fuse box and the switch. You can check by
putting 12V on the switch and pressing the pedal. You should have brake
lights.
Jim
Back to the Home of PROJECT VIXEN