[DML] Re: DMC How are the fuel injector suppose to work in this system?

[srubano@xxxx]

Sounds like a great project for someone who needs to replace their 
Fuel system. I mean the Fuel distrib is $1000.00+ new, fuel 
injectors are ~$35 a piece (~$210 for all 6), Control presure 
regulator is ~$500.00 new or ~$200 rebuilt. That right there comes 
out to about ~$1710.00 with a new CPR and ~$1410.00 with a rebuilt 
CPR valve.

Steve

--- In dmcnews@xxxx, jwit6@xxxx wrote:
> Andy,
> You could probably do it with all new stuff for about $1600.00, 
but you would 
> have to fabricate the fuel rails, tps mounting and brackets, and 
do the 
> programming/tuning yourself.
> 
> About (these are ball park :-)
> $900.00 for the ECU, AT and ET sensors, 
> $400.00 for new Bosch injectors, 
> $100.00 for MAP sensor and pressure regulator,
> $ 60.00 for TPS
> $ 50.00 for fuel rail fab parts and TPS bracket parts.
> $100.00 in misc like R9 MPI fuel line, clamps, fittings, wire 
looms, cable 
> ties, etc...
> --------------------
> $1610.00 maybe if you do some engineering, the programming, tuning 
and 
> fabrication your self.
> 
> Hope this helps.
> The car and conversion has just been featured on the Racetech web 
site in 
> thier "Projects" section. 
http://www.sdsefi.com/features/nov01del.htm Check 
> the bottom of their home page for other projects. They're at 
www.sdsefi.com 
> You might want to check it out.
> Jim