Re: [DML] Strange Stalling problem

[dherv10@xxxx]

Kevin, Several things could be going on. Gas feed, loss of fuel pump 
connections for a second. Look and see if the connector coming off the 
inertia switch shows and signs of melting.If you may have hit the connector 
with your foot and pulled it loose just enough to barely make contact. Press 
it in good after you take it out and reinstall it. Also, check the wires on 
the ignition coil and the white resistor against the fire wall. When was the 
last time the accumulator was replaced. You can see the connector on the web 
site at http://www.specialtauto.com/elec_main-2.shtml
John hervey
http://www.specialtauto.com/