 
Re: [DML] instrument cluster lights - help!
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] instrument cluster lights - help!
- From: Soma576@xxxx
- Date: Sun, 7 Oct 2001 17:10:26 EDT
In a message dated 10/6/01 10:46:32 AM Central Daylight Time, dherv10@xxxx 
writes:
> Andy, Several of the ground wires go to #12 & #13 by the diagram . Black is 
> normally always gnd on the D. I haven't take a binnacle off yet, but I have 
> seen the connector.12 is low beam side gnd and 13 is high beam side gnd. I 
> may pull my binnacle off this weekend. I haven't traced where the grounds 
> connect after the connector.
> 
Hello everyone,
i am stupid. i found the reason why my low beam and right turn signal lights 
wouldn't illuminate. when i removed the tachometer, i replaced the 
paper/foam cushion upsidedown - which blocked viewing of the lights. boy did 
i feel stupid when i realized that!!!!!
Andy
Soma576@xxxx
1982 DeLorean DMC-12 VIN#11596
Fargo, ND 58102
[Non-text portions of this message have been removed]
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN