Re: front brake calipers

[srubano@xxxx]

The only way the bleader screws would be stripped out is by a 
careless mechanic who bled the system. They sometimes use to much 
force and when the strip them, they don't bother to replace them 
(even though they cost only a few dollars). 

Are your calipers and/or master cylinder bad?? Make sure that there 
isn't any air in the brake system....it shouldn't cost you $250 to 
replace bleeder screws and bleed the system.

Steve

--- In dmcnews@xxxx, orentha@xxxx wrote:
> I had my front brake calipers and master cylinder replaced last 
> summer. And recently I noticed that my brake pedal doesn't have 
much 
> pressure and goes all the way to the floor.
> So I took it in and had the brakes tested. And the bleeder screws 
in 
> the front calipers are completely stripped out.