Re: [DML] Temperature Gauge sender

["Ryan Foster" <westiething@xxxx>]

I had a problem with my temp guage too. I traced the problem ti the pin 
connectors in the front righthand side of the engine compartment. the female 
side of the connector was spred open so it wasn't making contact. If you 
haven't allready you might want to try that first. It is the lower white 
plug farthest foreward. Ryan- vin.#16301

> From: "George Ryerson" <TRyerson@xxxx>
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> To: "DMC Newsgroup" <dmcnews@xxxxxxxxxxxxxxx>
> Subject: [DML] Temperature Gauge sender
> Date: Wed, 6 Jun 2001 11:15:34 -0400
>
> I've got a situation with my '83 in which the temperature gauge does not 
> work. Because of this, it seems a good idea to check out the temperature 
> sending unit. Unfortunately I've been unable to determine where this device 
> is located.
>
> I'd really