 
[DML] Re: Warm-up Regulator?
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Warm-up Regulator?
- From: dherv10@xxxx
- Date: Wed, 09 May 2001 04:00:49 -0000
Kevin, I'm not trying to make a mechanic out of you. But I have been 
working on cars like a lot of us out here, and I have never included 
a fire extguisher as part of my tool kit. Yes, I have a couple in the 
house and at the office. But, If you handle gas with respect and read 
a little about what you want to do in the workshop manuel and don't 
do something dum like smoking around the gas, then it will be no more 
of a problem than filling up your gas tank in the car with gas. Did 
you know that metal to metal can make a spark to ignite gas, but when 
was the last time you heard of someone blowing up a service station 
when getting a fill up.To many people throw around fire, fire, fire a 
lot to scare people.
John Hervey
Fire Chief of Forney, Texas
www.specialTauto.com
Your De Lorean Parts Store.
--- In dmcnews@xxxx, "Kevin Abato" <delorean@xxxx> wrote:
> I had the car in at PJ Gradys about 4 weeks ago, and Rob told me 
that my
> regulator was almost/or is shot, and I would need a new one. I 
figured if
> this is not a hard thing to do, perhaps I could take a crack at it 
(Rob...if
> you are reading this..please do not cringe! :) ) and see if I 
could do it
> myself with my limited skills. I was about ready to do it after 
last nights
> post, but then I saw the warning about the gas lines, and having a 
fire
> extinguisher ready, and now I am a little nervous again. I might 
just leave
> it for Rob to do when I take the car in again in June for my AC.
> 
> -----Original Message-----
> From: jtrealty@xxxx [mailto:jtrealty@xxxx]
> Subject: [DML] Re: Warm-up Regulator?
> 
> 
> Before you go replacing the control pressure regulater what are your
> symptoms? Did you verify voltage and a good connection at the black
> plug? Did you make sure that the short vent hose is not
> kinked-blocked? There was a post a while back about someone who had 
a
> problem with his regulater so he disassembled it and found a spider
> inside. After cleaning and reassembly he was fine!
> David Teitelbaum
> vin 10757
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN