 
Re: door dings caused by window regulator
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: door dings caused by window regulator
- From: DMCVegas@xxxx
- Date: Wed, 25 Apr 2001 21:26:50 -0000
>From what you've described, what you are looking at is probably 
inappropriate closing of the doors. The stainless steel used in the 
DeLorean body panels is much softer than typical carbon steel unsed in 
conventional cars. Example: When I first got my car, I used to alyways 
grab the door on the section right below the rear bottom corner of the 
window. Did this daily durring the hot summer in an effort to avoid 
burning my hands. What I have ended up with is an indentation of the 
glass and rubber seal around into the door. Not very noticable, but I 
am still kicking myself over it >:(
Next time you see a car that has this indentation in the door, ask the 
owner to close the door and observe them while they do. See where they 
grab the door at.
-Robert
vin 6585
--- In dmcnews@xxxx, "Walter" <Whalt@xxxx> wrote:
> I have noticed the same dents in every DeLorean car door that I have 
looked
> for them including both the passenger and driver's doors. These 
dents on
> every car are located approximately in the center of the door just 
below the
> molding. On some cars it is much more noticeable than others,...
<SNIP>
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN