 
Re: Volvo valve in air intake
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Volvo valve in air intake
- From: "Jim Reeve" <ultra@xxxx>
- Date: Sat, 21 Apr 2001 05:30:03 -0000
Yes, it does add a bit of restriction to the air intake. This is one 
reasons why I removed my whole assembly and put a generic intake hose 
from the filter box to the elbow by the pontoon. There isn't too much 
noticeable difference, but I could feel a slight boost at high rpms in 
higher gears. The other reason I removed this off of my car was 
because mine was rusting, and fileing a hole into the aluminum cooling 
line which it rubs. Anyone with this still in place really should 
check that alumimum pipe for wear.
Jim Reeve
MNDMC - Minnesota DeLorean Club
DMC-6960
--- In dmcnews@xxxx, Roland Barmettler <roli@xxxx> wrote:
> But isn't this whole air intake system with all its bends, hoses and
> that valve posing quite some air flow restriction and therefore some
> performance loss ?
> 
> Greetings,
> Roland
> Roland Barmettler - roli@xxxx - http://www.DeLorean.ch - VIN #11512
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN