 
Re: Correction to door locks/zillas/solenoids
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Correction to door locks/zillas/solenoids
- From: srubano@xxxx
- Date: Fri, 09 Feb 2001 18:50:06 -0000
I want to correct something in my last post. The vendors that sell 
the LockZilla have the OEM type harness/connectors for it in stock, 
you don't have to send them your old one. I was just made aware of 
this from another DML member. But as I said before, if both plastic 
connector housings are melted (as mine were) I would suggest getting 
the LockZilla without the OEM type connector and crip it onto the 
main harness. The Delorean vendors can instruct you on what to do.
Steve
--- In dmcnews@xxxx, srubano@xxxx wrote:
<SNIP>
>It would be easier to install the LocZilla with the OEM harness, but 
>you 
> will have to send them your old lock Module with the harness so 
that 
> they can "transplant" the harness to the LockZilla. Of course if 
your 
> harness is melted or in poor condition then I would suggest to just 
> cut the connector off the main harness that is in the car and 
> purchase the LockZilla as is, It will come with crimp on BUTT 
> connectors to crimp to the main lock module harness that is in the 
> car.
> 
<SNIP>
> So in conclusion: If you want the OEM connector harness on the 
> LockZilla and you don't want to be charged for the Core, send all 
> three old parts to the vendor and then have them send you the 
> LockZilla with the OEM harness installed and the new solenoids.
> 
> Steve
> 
> --- In dmcnews@xxxx, Soma576@xxxx wrote:
> > Hello All,
> > 
> > ><SNIP> 
> > my question is this: i am about to order lockzilla. i should 
> probably order 
> > at least one new lock solenoid at the same time, correct? would 
it 
> be wise 
> > to replace the passenger side one at the same time? i have no 
> problems right 
> > now with it, but i'm sure it will eventually go out. also, some 
of 
> the DMC 
> > websites talk about a 'core charge' if you buy new solenoids. can 
> someone 
> > explain what this means to me? and should i pay the extra money 
to 
> get the 
> > original harnesses included when i buy new solenoids?
> > 
> > thanks for the tips!
> > Andy
> > 
> > Soma576@xxxx
> > 1982 DeLorean DMC-12 VIN#11596
> > Fargo, ND 58102
> > 
> > 
> > [Non-text portions of this message have been removed]
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN