Lamp Relay Module disclaimer (?)

[rbrogren@xxxx]

For those of you that sent an e-mail to me: Send either a fax number 
or your address and I will explain via fax or snail mail. 

For those of you that have posted questions about the modification: 
My intent was to make the basic information available, but I am not an 
electonics expert and it is beyond my capabilities to answer any in 
depth technical questions. 

Having said that, I do know a few things about electronics and I 
believe that the modification could handle two additional courtesy 
lights and that the timing is not adjustable. 

To forestall additional questions, the following is a very brief explanation: 
"This lamp delay module contain a cirquit board, the heart of the module is a 
RCA integrated cirquit, four 2-input NAND gates and a MOS FET. 
The cirquit operates as a one-shot, triggered when the doors 
are closed. The MOS FET is biased during this interval, 
illuminating the dome lights. 
The one-shot times out approximately 90 seconds later. 

Roger 
VIN 1074, (with an LDM that works. Sort of.) 
>>>>>>>>>>> 



[Non-text portions of this message have been removed]