[DML] Re: door seal

["zeilner0" <zeilner0@xxxxxxxx>]

Thank you Elvis, this is exactly the problem I have. Even the old 
seal was damaged in this corner. But how can I fix the problem? Is it 
a general problem or a problem of door adjustment or the seal itself? 

Gerhard
vin 3092 





--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@xxxx> 
wrote:
> 
> I don't see why he should adjust the anchor pins when they worked 
properly
> before ?
> 
> I guess he has the common problem now, that the inner door seal
> on the top front outer corner is touching the door when closing.
> 
> Gerhard, check out if the seal is being pulled to the inside of the 
> car when closing the door. That's very often a problem with new 
door 
> seals. Don't mess with the anchor pins if they were set correctly 
before.
> 
> Maybe it's a good idea to get you in touch with some other Austrian
> owners.
> 
> Elvis & 6548
> 
> 
> > 
> > It is very likely that the anchor pins that the door locks close 
on
> > were adjusted to the old, worn door seals. With the new seals the 
pins
> > must be readjusted. It is not too hard to do but if you don't 
have a
> > lot of experience it could take a while of trial-and-error. Take 
the
> > round rubber grommets off and you will see that you can put a 
wrench
> ...cut....
> 
> -- 
> +++ GMX DSL Premiumtarife 3 Monate gratis* + WLAN-Router 0,- EUR* 
+++
> Clevere DSL-Nutzer wechseln jetzt zu GMX: 
http://www.gmx.net/de/go/dsl








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/