Re: [DML] A/C Question

[Soma576@xxxxxxx]

In a message dated 5/31/04 9:28:50 AM Central Daylight Time, 
dave.stragand@xxxxxxxxxxxxxxx writes:

<< I did have a problem where the back of the high-pressure cutoff switch came
 off while I was mounting the high side hose, but it snapped back on without
 a problem.  The compressor, accumulator, expansion tube and low-pressure
 switch are all new.  Does anyone have any other suggestions as to why the
 compressor will not shut off?   >>

Dave,

My car did the exact same thing last month.  I had the system evacuated, 
vacuumed, and recharged.  turned out the system had barely enough freon in it to 
operate.  Now it works like a charm.  Take note that I am retrofit for 134A 
however (which blows really damn cold - it MIGHT be a touch warmer than R12 but 
it's enough to freeze your hands off!!!).  I have a couple of O-rings to 
replace still, which is why my level was down.  

Andy



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/