RE: [DML] Removing Angle Drive Circular Spring

["PJ Grady" <rob@xxxxxxxxxxx>]

Hi Bob,

The nut is often difficult (notice I didn't say impossible but sometimes it
is) to remove without breaking the "snout" off the angle drive. You could
save the aggravation and keep the drive as a rebuildable part if you order a
new axle nut. We have them in stock...Part # 105027G Axle/A.D. Nut $22.50

Rob Grady 

-----Original Message-----
From: Bob Hlavacek [mailto:bob.hlavacek@xxxxxxxx] 
Sent: Sunday, April 25, 2004 9:01 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Removing Angle Drive Circular Spring


Does anyone know how to remove the circular spring from the old angle drive
so you can retrieve the large nut?  The instructions say compress the spring
with two small screwdrivers, but I don't find that possible.

Thanks for your help!

Bob Hlavacek
10961





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links



 







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/