 
[DML] Re:  Inlet air manifold
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re:  Inlet air manifold
- From: rbrogren@xxxxxxx
- Date: Tue, 13 Apr 2004 00:10:58 EDT
Mr T
I bet you broke off the small and hard hose from the heater control. From 
behind the engine it goes into the left pontoon, right? Same thing happened to me 
and I haven't fixed it yet!
It appears that you didn't follow my advice to download and print the two 
articles from the Archives! There is an o-ring in the hole where the tube you 
mention goes through the lower air casing. In all probability you have nicked the 
0-ring and good luck fishing out the old one and replacing it with a new! 
Roger
Vin 1074
In a message dated 4/12/2004 3:38:56 PM Eastern Standard Time, 
dmcnews@xxxxxxxxxxxxxxx writes:
I found one 
vacum line in the back, alittle one and I cant find where It goes, 
but I dont think just that little thing could be causing me all 
these problems.
Mr. T.
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN