Re: [DMCForum] Mode switch

[mike clemens <rmclemns@xxxxxxxxx>]

Ryan,

I don't think I ever thanked you for the diagrams. 
They were very helpful and yes, I did have them hooked
up correctly, as verified by your colors.

Thanks--------Mike



--- Ryan Wright <ryanpwright@xxxxxxxxx> wrote:

> Mike,
> 
> Got the picture from you via private email - thanks.
> 
> OK, here's where you have to get creative: The mode
> switch is
> positioned "up" in the picture, in the final
> configuration as it would
> be if installed in the car. The picture doesn't show
> the back of the
> switch but where the hoses enter it in the diagram
> is accurate. So you
> have to start tracing things out.
> 
> Here's the original drawing:
> http://www.ryanwright.com/delorean/modeswitch1.jpg
> 
> Here's the drawing with the vacuum lines colorized:
> http://www.ryanwright.com/delorean/modeswitch2.jpg
> 
> Here's a close-up of the mode switch:
> http://www.ryanwright.com/delorean/modeswitch3.jpg
> 
> So, from the drawing it's very easy to see where the
> lines route to,
> but you're having a problem finding which connection
> on the back of
> the mode switch they hook to - correct?
> 
> That was the same problem I had. This drawing solved
> it for me, but
> like you, I had to stare at it for a long time
> before it clicked. It's
> even easier now that I've colored the lines in. So,
> hold the mode
> switch in position, exactly as it would be if you
> had it mounted in
> the car. Then line your vacuum lines up according to
> the colored tubes
> in the close-up drawing. You'll have two barbs near
> the top of the
> mode switch - the right one is blue, left one is
> red. Then just go
> around the switch. Green is next to the red, then
> yellow, then purple.
> Of course your real lines aren't these colors...
> 
> Route them from the mode switch to where the diagram
> shows them going
> & test everything. It should work as expected.
> 
> I hope this helps. Let me know if you need more
> help. This is how I
> fixed mine, and it worked perfectly the first time.
> 
> -Ryan
> 
> On 9/20/07, mike clemens <rmclemns@xxxxxxxxx> wrote:
> >
> > Ryan,
> >
> >  I'm pretty sure I got it right, but here's the
> picture
> >  I think you are looking for.  Let me know if it's
> the
> >  right one.
> >
> >  Mike
> 



       
____________________________________________________________________________________
Pinpoint customers who are looking for what you sell. 
http://searchmarketing.yahoo.com/


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/