Re: [DMCForum] Mode switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Mode switch
- From: "Ryan Wright" <ryanpwright@xxxxxxxxx>
- Date: Thu, 20 Sep 2007 10:03:05 -0700
Mike,
I eventually just had to use that diagram. It is somewhat intuitive,
just hard to figure out. Do you have a copy of it? If you post it here
I'll mark it up for you and show you which ones go where. I tried to
grab it off DMCH's site but it's not there anymore.
-Ryan
On 9/18/07, mike clemens <rmclemns@xxxxxxxxx> wrote:
>
> Ryan,
>
> Yep, I studied that diagram until my eyes crossed and
> it was of no help. I know which colors go to which
> number on the switch, but to which actuator is what is
> not clear. The names of valves, from the manual, are
> of little help, since their location on the actual
> unit is what is important.
>
> The problem with Josh's car is that when I got in
> there to work on his radio, I found three of the five
> vacuum lines were disconnected totally and one of the
> lines was missing completely. I'm sure I have the
> 'source and heater' lines done correctly and I'm 95%
> sure I got the other three in the right place. The
> reason I was hoping for a better diagram or pictures
> is that once I close everything up, I don't want to
> have to go in there, ever again!!
>
> Mike
>
>
> --- Ryan Wright <ryanpwright@xxxxxxxxx> wrote:
>
> > Mike,
> >
> > On 9/17/07, mike clemens <rmclemns@xxxxxxxxx> wrote:
> > >
> > > Now, a serious question----I've studied the
> > manual,
> > > I've looked at all the diagrams, and I've traced
> > every
> > > lead I can find----but I still cannot find a
> > diagram
> > > that shows me how the Mode Switch connects to
> > each
> > > individual valve. I know the names of the
> > > connections, but I would like to know where the
> > > physical location is. Does anyone have this
> > > handy??????? Pictures would be great!!
> >
> > I had to carefully look at the mode switch routing
> > diagram to figure
> > this out. I assume you've looked at that? My car
> > came with the vacuum
> > lines misconfigured and it took me seemingly forever
> > to figure out how
> > to re-route them properly. All I ever found was that
> > diagram. I just
> > tried to look it up on DMCH's site but, apparently,
> > for no good reason
> > whatsoever, their entire online parts catalog has
> > been removed.
> >
> > -Ryan
> >
>
> __________________________________________________________
> Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games.
> http://sims.yahoo.com/
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/DMCForum/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:DMCForum-digest@xxxxxxxxxxxxxxx
mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN