RE: [DMCForum] Re: Torque Settings........

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

Mike,

I just got a reply from the other owner.  He couldn't find a torque setting
either so he just snugged them up.  I think you will be ok with that until
an actual number can be found.

I would tighten them until they break and then back them off a quarter turn.
;)

Greg



-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Mike Bosworth
Sent: Tuesday, June 20, 2006 1:33 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Torque Settings........

Thanks Greg

Mike
#2001

--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@...> wrote:
>
> Mike,
> 
> We did this on a few local cars during my door removal party.  
It's been so
> long now I don't recall the torque setting but I don't think it 
was very
> much.
> 
> We tightened them until they were snug and on several cars they 
were loose.
> I will ask some of the people who were there and see if they 
remember.
> 
> Greg
> 
> 
> -----Original Message-----
> From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] 
On Behalf
> Of Mike Bosworth
> Sent: Tuesday, June 20, 2006 9:45 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: Torque Settings........
> 
> No one got any idea on this ??.... i know its not a 'hot topic' 
but 
> i would rather set these up correctly than just 'ugg' them up 
> tight :)
> 
> Thanks
> 
> Mike
> #2001
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@> 
> wrote:
> >
> > Hi All
> > 
> > Sorry i know i have posted this on the DML but can anyone on 
here 
> > help ?
> > 
> > Im dammed if i can find these settings in my manual, has anyone 
got
> > any idea as to a torque setting for these.
> > 
> > 108330 Engine CROSSBRACE to frame bolts
> > 
> > 
> > Fibreglass Underbody to frame bolts
> > 
> > 
> > Thanks for any help
> > 
> > Regards
> > 
> > Mike
> > #2001
> > www.deloreans.co.uk



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/