I've had to do this before. Go to your local bicycle shop and buy some brake cable. There is more than enough there...and it costs about $5. Keep the original tubing in place and just feed the cable through. It will take about 5 minutes to do. Erik Geerdink timnagin <timnagin@xxxxxxxxxxxxxx> wrote: See if you can get it touch with Josh Haldeman real quick. I am not sure when he is leaving or arriving. Also, Erik Geerdink may have one and I think he is leaving out Thursday morning. Greg -----Original Message----- From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf Of Mike Walsh Sent: Wednesday, June 14, 2006 8:06 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: [DMCForum] Trunk cable anyone? Go figure, I was just taking #17084 out to fill up ready to go to PR when the cable for the trunk slipped out of the bolt. The cable is not broken but there is noway I was able to thread it back through the hole in the bolt. I will be driving with a pair of vice grips so I can get gas, and it is too late to order one and have it available on the weekend. Would anyone have an extra cable (or some technique for fixing this) at Pheasent Run? I will be the guy with Ontario plate DMCDREAM. Thanks - Mike #17084 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] ------------------------ Yahoo! Groups Sponsor --------------------~--> Check out the new improvements in Yahoo! Groups email. http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/HliolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ <*> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/