RE: [DMCForum] Fans - the final word

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

There has to be a way to open them.  Maybe using a hot wire to melt through
the side or a Dremel.  After seeing mine in pieces it looks like it was just
glued together.

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Martin Gutkowski
Sent: Thursday, October 27, 2005 11:14 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Fans - the final word

Well, there you go :-) I've taken a couple apart and beefed them up with 
added wires, but always have trouble taking the cap off without it 
shattering. On the one in the pictures, part of the bottom bit broke 
off. That particular one came out of my car in 2001 when I got it. One 
fan didn't work and the light was on.

Martin

timnagin wrote:

> Martin,
>
> That is very interesting, thank you.  You stated, "Unfortunately the blue
> plastic case is almost impossible to remove without destroying it!"
>
> Mine fell apart when I pulled it from the relay bank.  It also has very
> similar cold solder joints and was in the car up until I bought it two 
> years
> ago.
>
> Greg

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---