[DMCForum] Re: Alternative Illumination (Light Bulb Thread) (Dave S)

["content22207" <brobertson@xxxxxxxxxxxx>]

I don't usually measure my fires but stoke them "by sight". If they
look about right, that's good enough for me.

That's one of the benefits of fire -- you don't need a bunch of
expensive tools and instruments. 

And light bulbs can be very fussy. Not enough voltage, and they barely
glow. Too much voltage, and they burn out. Unlike old fashioned fire,
which basically will burn whatever you throw into it, there's only a
narrow range of voltage over which light bulbs perform properly.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx>
wrote:
> Would the Canadian spec fixtures require grass in kg instead of lbs?  Is
> there an RPM to BOG (blades of grass) chart?
> 
>  
> 
> ________________________________
> 
> From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On
> Behalf Of Marc Levy
> Sent: Wednesday, September 07, 2005 3:19 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: Re: [DMCForum] Re: Alternative Illumination (Light Bulb Thread)
> (Robert)
> 
>  
> 
> Why would you get grass from the side of the road,
> when Video Bob can sell you some...  With
> instructions, and free shipping!!
> 
> 
> --- content22207 <brobertson@xxxx> wrote:
> 
> <SNIP>
> > burned out bulb! Just pull over on the side of the
> > road, chuck some
> > grass in the socket, and I'm on my way again.
> <SNIP>
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> 
> 
> SPONSORED LINKS 
> 
> Dmc
> <http://groups.yahoo.com/gads?t=ms&k=Dmc&w1=Dmc&w2=Dml&w3=Dmc+fz10&w4=Dm
> c+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=DnZr22agbzZ0GxZzHfn2B
> w>  
> 
> Dml
> <http://groups.yahoo.com/gads?t=ms&k=Dml&w1=Dmc&w2=Dml&w3=Dmc+fz10&w4=Dm
> c+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=Nwzrk_zfAm_-SZBRyK2RA
> g>  
> 
> Dmc fz10
> <http://groups.yahoo.com/gads?t=ms&k=Dmc+fz10&w1=Dmc&w2=Dml&w3=Dmc+fz10&
> w4=Dmc+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=3UAV1OrZHolvuN4Q
> pduyJA>  
> 
> Dmc fz1s
> <http://groups.yahoo.com/gads?t=ms&k=Dmc+fz1s&w1=Dmc&w2=Dml&w3=Dmc+fz10&
> w4=Dmc+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=BzX_l0ZIKUQhMIfY
> 53Kjpw>  
> 
> Delorean part
> <http://groups.yahoo.com/gads?t=ms&k=Delorean+part&w1=Dmc&w2=Dml&w3=Dmc+
> fz10&w4=Dmc+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=x-1TsTuACSq
> TIceb4I2Yzw>  
> 
> Dml forte
> <http://groups.yahoo.com/gads?t=ms&k=Dml+forte&w1=Dmc&w2=Dml&w3=Dmc+fz10
> &w4=Dmc+fz1s&w5=Delorean+part&w6=Dml+forte&c=6&s=80&.sig=sL1GNEmWZfbGbEr
> QoXTctA>  
> 
>  
> 
> ________________________________
> 
> YAHOO! GROUPS LINKS 
> 
>  
> 
> *       Visit your group "DMCForum
> <http://groups.yahoo.com/group/DMCForum> " on the web.
>         
> *       To unsubscribe from this group, send an email to:
>        DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
>         
> *       Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> . 
> 
>  
> 
> ________________________________
> 
> 
> 
> [Non-text portions of this message have been removed]

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---