Re: [DMCForum] wheels shake update...again
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] wheels shake update...again
- From: DMCVIN6683 <dmcvin6683@xxxxxxxxx>
- Date: Wed, 10 Aug 2005 21:31:07 -0500
I had bad rear tires on my car plus bent Trailing arm bolts and one
Trailing arm bolt bushing was shaped like Pac-Man and had the same
vibration. I replaced it all and it is as smooth as silk now.
All my tires were balanced off the car.
Mark V
On Aug 10, 2005, at 9:30 PM, Erik Geerdink wrote:
> Ok, so I went under the car and retorqued everything. I also reseated
> the steering rack to make sure. I did notice that the sway bar wasn't
> torqued down enough. And also the passenger tierod/spindle connection
> wasn't torqued all the way. I also reseated and adjusted the upper
> and lower steering column joints. HUGE DIFFERENCE!!!!! It drives
> like a different car. My squirely rear end is gone, my teeth
> chattering rattle is gone as well. There is still a bit of a
> vibration at 60MPH, but after I get passed 65mph it goes away. If
> anyone has any ideas as to what the vibration might be, please let me
> know. I'm betting I need to take it to a place that can balance my
> wheels properly. Doesn't it need to be done on the car? Last time i
> know it was done OFF the car.
>
> Erik
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
SPONSORED LINKS
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN