[DMCForum] Re: Stainless UK exhaust

["Matt Spittle" <mds328@xxxxxxx>]

So anyway, do you have the exhaust?  How does the piping come off of
the headers?  Does it go toward the front of the car and wrap around
the frame "towers" or does it come toward the rear of the car infront
of those "towers?" 

The reason is that I don't care for the 1-big-muffler design that it
uses.  I would rather have 2 smaller separate mufflers mounted
directly behind where the tailpipes emerge.  Since the gentleman
selling it agreed to sell me the headers ONLY, I was wondering if I'll
be able to fabricate the rest of the design that I wanted without any
sharp bends.  If not, I may as well use the stock eagle premier
manifolds which are already pointed toward the front of the car.  

This is why I was just asking for pictures to begin with.

thanks,

Matt
#1604


--- In DMCForum@xxxxxxxxxxxxxxx, Daniel Shane <daniel.shane@xxxx> wrote:
> They don't interfere.  They are a very well built and designed
system.  If
> you get one you can remove the Cat¹s for everyday driving and then place
> them back in if you need to get an emissions test done.
> 
> They are very sporty and sound very nice, and you can even get them
to shot
> out flames on the overrun if you want !!!
> 
> Dan
> 
> 
> On 20/4/05 8:39 pm, "Matt Spittle" <mds328@xxxx> wrote:
> 
> > 
> > The reason is that the guy from www.stainless-exhaust.com agreed to
> > sell me JUST the headers and let me fabricate the rest as I like.  I'm
> > not disputing that the kit doesn't fit :)
> > 
> > Matt
> > #1604
> > --- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> >> > Why do you think that? Can't you just take their word for it? The
> >> > manifolds come down behind the frame uprights... I put one back
> > together 
> >> > today (head gaskets)
> >> > 
> >> > Martin
> >> > 
> >> > Matt Spittle wrote:
> >> > 
> >>> > >
> >>> > > Does anyone have any shots of this mounted on a car from up
underneath
> >>> > > looking into the engine bay area?  From looking at the
pictures of it
> >>> > > on www.stainless-exhaust.com, it looks like it would
interfere with
> >>> > > the frame. 
> >>> > >
> >>> > > thanks,
> >>> > >
> >>> > > Matt
> >>> > > #1604
> >>> > >
> > 
> > 
> > 
> > 
> > 
> > Yahoo! Groups Links
> > * To visit your group on the web, go to:
> > * http://groups.yahoo.com/group/DMCForum/
> > *  
> > * To unsubscribe from this group, send an email to:
> > * DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
> > *  
> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> > <http://docs.yahoo.com/info/terms/> .
> > 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.