RE: [DMCForum] Need a bearing..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Need a bearing..



I called a few places here that specialize in this and they didn't have
anything that wide.  Several suggested stacking three 17 x 35 x 10 together
and using a bronze bushing to fill in some of that space, if you can.  The
largest they could find was a 17 x 35 x 14.

Greg



-----Original Message-----
From: Marc Levy [mailto:malevy_nj@xxxxxxxxx]
Sent: Monday, April 04, 2005 9:11 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] Need a bearing..



Thanks.. Checked those.  Still cant find what I am
looking for!

I need a Shaft dia of 17mm, OD of 35mm, and width
33mm.

The width seems to be the problem.  I cant find one
that long.

--- Scott Mueller <scott.a.mueller@xxxxxxxxx> wrote:
>
> Motion Industries, McMaster-Carr or Grainger.




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated