[DMCForum] Re: Tinted head/tail lamp covers

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

I at first thought of that, but I like the look of the liscense bezel.
Plus the manufacturing cost would be quite more to produce  piece of
that size, (why the radiator shroud is now 2 pieces in repro form)

And if I somehow chipped one part of it I would half to replace the
whole thing, $$$$$

Plus owners might get in trouble a bit because that would almost black
out the plate entirley, where a lightly colored smoke cover would just
dim it down a bit. Like the smoke liscense plate covers for modern cars.

Just my thoughts,


Joe









--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> That sounds cool.  What about a one piece cover that fits the entire
back
> end similar to KITT?  You would just have a slick, black surface
until the
> lights come on.
> 
> Greg
> 
> 
> -----Original Message-----
> From: Joe OBrien [mailto:joeyoseppijoe@xxxx]
> Sent: Thursday, January 13, 2005 12:26 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: Tinted head/tail lamp covers
> 
> 
> 
> 
> This is cool news, I'll buy a set of these. Do you plan on making them
> available as a general item or is eBay the only way you will be
> selling them?
> 
> You'd sell a lot more if you sold them direct out of your web page
> with a Paypal address. Sell the first few on eBay at a higher rate to
> cover costs, but please eventually make them available as a regular
> item, and make enough to sell to all who would want them.
> 
> Great idea though, I had always wanted a set, but the price was
> ridiculous just for a set of lund headlight covers.
> 
> Will you be making them in light smoke & dark smoke, or all dark?
> 
> Ever thought about crafting a small piece to cover the plate lightly
> to darken it out a bit?
> 
> Look forward to seeing these items, and hopefully buying a set direct
> from you soon.
> 
> 
> Joe OBrien
> 
> 
> 
> 
> 
> 
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, "jamesrguk" <James_rg@xxxx> wrote:
> >
> > Hi all,
> >
> > Following the success of the cast alloy rear number plate surround.
> >
> > I am having some new bits'n'bobs made and thought I would let people
> > know.
> >
> > A pal of mine in the plastics industry is remaking the front tinted
> > head lamp covers which should be quite cool.
> >
> > He is also making some tinted rear lense covers which will just push
> > over the original rear light clusters, so if yours are faded or
> > damaged or you just want somthing a bit different then they will be
> > quite cool, it will also cover the screw holes.
> >
> > The good thing is they will be quite lite meaning cheaper intl.
> > postage
> >
> > Any interest or comments welcome, they will probably be on e-bay by
> > the end of January
> >
> >
> >
> > James

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.