Re: [DMCForum] Re: throw-out bearing replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: throw-out bearing replacement



Your linky no worky.

Mark V



On Sunday, October 17, 2004, at 11:26  PM, Jim wrote:

>
> It does work and works fantastic. I'm really happy with it. Here is a
> shot of what came out of the car.
> http://wegottafindearth.com/clutch\clutch-1.jpg
>
> Thanks again Walt!
>
> Jim
>
> -----Original Message-----
> From: Walter Coe [mailto:Whalt@xxxxxxx]
> Sent: Sunday, October 17, 2004 8:40 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: throw-out bearing replacement
>
>
> Hey it works!  That is the smoothest/easiest shifting
> DeLorean I have driven.  NAPA charged $35 to resurface the
> fly wheel.  They drove the pins out to do it.  I hear that
> some places wont go to the trouble.  The clutch fluid
> reservoir really needs to be cleaned out.  It had been about
> 4 years, so it was full of gunk.  But considering it was
> 1AM, I didn't want to risk having to stay up later.
>
> The clutch fork had the spring clip broken, but I think the
> only reason for it is to make sure the fork stays in place
> while factory workers bump it around.  If I were doing one
> again, I would break the thing off to make sure it doesn't
> fall off later & cause trouble.  I put a dab of brake
> caliper grease on the ball/fulcrum and on the pin connection
> for the slave cylinder.  That was as dry as a popcorn fart
> and was already kinda worn.
>
> While we were test driving the car & running errands, I
> really freaked Jim out by roll starting the car.  Suddenly
> the car was running, and he was worried because he didn't
> hear me crank it.  There is no sense in wasting the starter
> when you can roll down a hill.  :-)
>
> Walt    Tampa, Florida
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated