RE: [DMCForum] Speaker wire polarity?

["Farrar Russell Carroll Hudkins" <fhudkins@xxxxxxx>]

It's not quite as bad as you think. Just hook the speakers up, and if
they sound out of phase, reverse the polarity of one of them. You
won't blow anything up.
 
--Farrar

________________________________

From: lakelanier20 [mailto:derek4567@xxxxxxxxxxx]
Sent: Wed 8/18/2004 2:39 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Speaker wire polarity?



Thanks for the strut responses.  I decided to go with a set of DMCH
ones.  Apparently they did fix the length issue: 
http://autos.groups.yahoo.com/group/dmcnews/message/34004

But my new question is, with the Craig radio, does anyone know which
wire is positive and negative going to the speakers?  It doesn't show
the polarity in the wiring diagram of the workshop manual.  Going to
each front speaker are two black wires, and one has a white stripe. 
The one with the white stripe has a wider spade connector than the
plain black one.  I believe that the wire with the white stripe is
the positive one.  The new pioneer speakers I have also use the wider
connector as the positive.  Am I correct about the polarity of the
original wires?

Thanks,
-Derek
VIN 5302





------------------------ Yahoo! Groups Sponsor
--------------------~-->
Yahoo! Autos. Everything you need to know about buying
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/HliolB/TM
--------------------------------------------------------------------~-
>


Yahoo! Groups Links









[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.