Re: [DMCForum] Setting HC / CO with a Gas Analyzer?

From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
Date: Sat, 07 Aug 2004 11:49:39 +0100

It sits around 1% - the lambda system will fight you if you try and adjust away from that. Dave Stragand wrote: > But set the CO to what? 0%, 0.5%, or higher? > > Dan's car will dial all the way down to 0% CO and 10 PPM HC... but that's > running way lean, isn't it?

Yahoo! Groups Sponsor

Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Follow-Ups:
- RE: [DMCForum] Setting HC / CO with a Gas Analyzer?
  - From: Dave Stragand

References:
- RE: [DMCForum] Setting HC / CO with a Gas Analyzer?
  - From: Dave Stragand

Prev by Date: [DMCForum] Re: George Bush"s mental health must be a consideration in the November election
Next by Date: Re: [DMCForum] Re: Rubbing Martin's Fur Backwards
Previous by thread: RE: [DMCForum] Setting HC / CO with a Gas Analyzer?
Next by thread: RE: [DMCForum] Setting HC / CO with a Gas Analyzer?
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated