[DMCForum] Re: Tuna Fish Tank Baffle

["content22207" <brobertson@xxxxxxxxxxxx>]

My tank is identical to yours. A large size tuna fish can just barely
fits through the opening. Is about 95% height and diameter of John
Hervey's baffle (you have to squeeze his to get it in. Not hard to do
because it's only made of aluminum flashing). One advantage of the can
-- has a solid bottom. Does a much better job of holding sloshing fuel
(that's why people still suck air with his -- the thing flops up &
down, holding no fuel at all). Drill some 1/8" holes near the bottom
so you don't exclude fuel when the tank level drops below the lip.
Mine are 1/4" from the tank bottom.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> >If your original baffle is in good condition then I suggest
> >you keep using it.  I would expect any stale system to need
> >a new suction hose, suction filter, fuel pump boot & cover.
> >If you are on a budget then follow Bill Robertson's example
> >with the tuna can.  I'm hardly above doing that myself.
> 
> 
> The baffle is ok, but I might have messed up the screen when I was
cleaning
> the tank.  The suction hose was very soft and squishy, but
everything else
> was fine.  The fuel pump boot is ok, but the cover is ripped.  I would
> rather wait and buy the good stuff, but I think the tuna can will
not find
> its way into my car :)
> 
> 
> >> The pump had a plastic Bosch sticker on it that fell off in my hand,
> >
> >The new ones come that way for applications where it is
> >mounted outside the tank with a strap.  I have heard about
> >people having those clog the fuel suction screen.  You are
> >lucky you caught it.  So are all the parts to your baffle
> >system there?
> >
> >Walt
> 
> 
> Can you define 'strap' without using the word 'on'?  ;)  Seriously,
I don't
> know of any strap that was on mine and the pump looked brand new.  I
could
> tell someone had been in there before, but it didn't seem recent.  I
think
> all of the baffle parts are there.  I will have to look again as it
has been
> many months since I had my hands in the tank.
> 
> Greg

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.