RE: [DMCForum] Re: Clutch Fork
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DMCForum] Re: Clutch Fork
- From: "John Hervey" <john@xxxxxxxxxxxxxxxx>
- Date: Mon, 17 May 2004 00:09:17 -0500
Bill, This came up before about a year ago. I took a picture of the clutch
fork hold down spring for prosperity.
John Hervey
http://www.specialtauto.com/delorean-parts/images/clutch-fork-hold-clip.jpg
-----Original Message-----
From: content22207 [mailto:brobertson@xxxxxxxxxxxx]
Sent: Sunday, May 16, 2004 11:15 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Clutch Fork
Ah, now I understand. Imminently helpful parts manual makes it appear
the fork pivots on that piece of sheet metal, which is what mine was
doing based on the wear pattern. Also explains why one ear snapped
off. I'll simply fashion a new one.
Now, about that oil problem...
Bill Robertson
#5939
>--- In DMCForum@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@xxxx> wrote:
> Is the little spring clip broken off of your fork? It
> goes over the pivot.
>
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
b.. To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN