RE: [DMCForum] Starter Issues

[Travis Goodwin <tgoodwin@xxxxxxxxxxxx>]

Did you take the solenoid apart and look inside?

Are you sure you have a good ground?

-----Original Message-----
From: nbrommer2k [mailto:nickbrom@xxxxxxx] 
Sent: Tuesday, May 11, 2004 10:34 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Starter Issues

Hello list,

Still having starting problems. Here's what I've done so far.

1) Removed starter and took it to an Auto Electronics shop. Guy said
it tested fine, I could hear it spinning when he had it on his bench.

2) Gave a good cleaning to all connections on starter and the leads
going to starter. Cleaned battery terminals and cables.

3) Reinstalled starter. Still won't fire. I turn the key and hear the
relay clicking, but starter does not turn.

4) When I jump between the terminals on the starter, it spins but
does not engage and turn the engine.

5) I interchanged the start inhibit relay (it's an auto) with the
relay next to it (a/c illumination?), but with no different results.

6) Swore and scratched my head a little.

Thoughts?

Nick





 
Yahoo! Groups Links

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.