[DMCForum] nut and bolt supplier to DMC...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DMCForum] nut and bolt supplier to DMC...
- From: <ken@xxxxxxx>
- Date: Wed, 7 Apr 2004 11:29:05 -0400
Message: 11
Date: Mon, 5 Apr 2004 20:38:35 -0400
From: "timnagin" <timnagin@xxxxxxxxxxxxxx>
Subject: RE: nut and bolt supplier to DMC...
Ken,
Do you have any detailed information on the ones you chose?
Thanks,
Greg
I will try to put some pictures up ... and get part numbers
Give me a couple days
Ken
005541
www.odod.ca
-----Original Message-----
From: ken@xxxxxxx [mailto:ken@xxxxxxx]
Sent: Monday, April 05, 2004 5:29 PM
To: dmcforum@xxxxxxxxxxxxxxx
Subject: [DMCForum] nut and bolt supplier to DMC...
I tackled the task of fixing the bolts for those rocker panels 2 summers ago
NOT FUN
I basically drilled each one out, then meticulously re-fibreglassed each
hole, and put some nice bolts with teeth from brafasco in the existing
holes.
Ken
005541
www.odoc.ca <http://www.odoc.ca/>
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN