Re: [DMCForum] Sears alignments

From: "Walter Coe" <Whalt@xxxxxxx>
Date: Fri, 19 Mar 2004 22:53:19 -0500

> The tech fearlessly adjusted the rear shims then > tightened by hand... not sure if that is okay, This is NOT okay. Be sure that the bolts are torqued to 55 foot-pounds. Otherwise they could loosen, the shims fall out... and things go boom. Walt
Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

References:
- [DMCForum] Sears alignments
  - From: thomaspaulmccoy

Prev by Date: RE: [DMCForum] A OLIVE BRANCH
Next by Date: Re: [DMCForum] Fatboy7
Previous by thread: [DMCForum] Sears alignments
Next by thread: RE: [DMCForum] Re: pre-production
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated