Re: [DMCForum] Re: More vinyl dye questions for Vixen Dave
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Re: More vinyl dye questions for Vixen Dave
- From: "Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>
- Date: Fri, 5 Mar 2004 16:42:48 -0500
Maybe try giving them another light coat? It's also possible that you just have a can that's off by a little bit.
----- Original Message -----
From: cruznmd
To: DMCForum@xxxxxxxxxxxxxxx
Sent: Friday, March 05, 2004 4:12 PM
Subject: [DMCForum] Re: More vinyl dye questions for Vixen Dave
The door panels were lighter, but seemed to darken over 3 days.
The knee bolsters came out even lighter than the door panels did
before they cured.
The dash is brown and I'm not using that as a comparison. The knee
bolsters look too light compared to the door panels. They -do- seem
to be darkening slightly but not enough.
Rich
--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx>
wrote:
> Are they lighter than the door panels, or just lighter than the
dash they
> are next to? I have noticed many dashes start to turn brown over
time.
>
> -----Original Message-----
> From: cruznmd [mailto:racuti1@xxxx]
> Sent: Friday, March 05, 2004 7:04 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] More vinyl dye questions for Vixen Dave
>
>
> Dave,
>
> I had two cans of identical dye. When I did the door panels, they
> appeared a tad lighter than OEM. After a few days, they seemed
> to "cure" and are now IDENTICAL to the OEM color. I was very
pleased.
>
> I next dyed the knee bolsters and the glove box lid. These are
> definitely too light, (lighter than the door panels) and it doesn't
> seem like they will tone down to the OEM color.
>
> I cleaned everything meticulously. I shook the can vigorously. What
> did I do wrong?
>
> Rich A.
>
>
>
> _____
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/DMCForum/
>
>
> * To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
b.. To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN