Re: [DMCForum] Re: Vinyl dye for McCoy
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Vinyl dye for McCoy



The plasti-cote stuff looks lovely but is a little too light and a
little too blue to match the seats (at least the ones in my project car.
My #1 car is black so no problems there!

The rear hub carrier would have to twist quite a lot and bend the
trailing arm cowlings out of the way before the front end of the arm
would hit terra firma.

Martin

cruznmd wrote:

>According to the Vixen archives, Plasti-cote #408 is correct for the
>gray interior cars. Normally available at Pep Boy's etc.
>
>My local Advance Auto quit carrying Plasti-cote. I purchased some
>Dupli-Color that looks like it might be the same thing.
>
>To my knowledge, #408 is just a shade of gray. Any vinyl dye that
>says it's color #408 should do the trick. It doesn't have to be a
>particular brand.
>
>Re: Trailing arms-
>It's my understanding that the arm can't swing enough to hit the
>pavement (I could be wrong. Martin? Dave S.?). Be not afraid. Just
>get checked out and install the Iconel bolts if you haven't already.
>
>I hope this helps.
>
>Rich A.
>

>




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated