Re: [DMCForum] [OT] need to read check engine codes

["Andrei Cular" <andreic@xxxxxxxxxxxxxxxxxx>]

I know for sure on the EEC-IV you stick a jumper in to one of the wires on
the top row of the diagnostic plug and the external lead, then you can hook
up a test light or count the flashes of the chkengine light.

And I though you could do that on the Ford EEC-V aka ODB-II cause they chose
to use the pulse based ODB-II.  I just remember it being a big deal in the
mustang community then one day someone found a way to read to the codes.


Andrei



----- Original Message ----- 
From: "Marc Levy" <malevy_nj@xxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 28, 2004 4:08 PM
Subject: Re: [DMCForum] [OT] need to read check engine codes


> I think this is true ONLY on PRE 1996 cars..
>
> If I am incorrect, please let me know..  It will save
> me a lot of headaches!
>
>
> --- Andrei Cular <andreic@xxxxxxxxxxxxxxxxxx> wrote:
> > I think on the Ford you can use a test light and a
> > jumper wire to read the
> > code.  I'll look in my books when I get home.
> >
> >
> > Andrei
> >

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.