[DMCForum] Re: Stock Volvo Water Pump Pulley Mount
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Stock Volvo Water Pump Pulley Mount



Actually now that I remember, my spare engine didn't have a clutch --
rather cheap plastic fan bolts directly to flange pressed onto pump
shaft. Pulley is sandwiched between them. I suppose you could use a
pulley from junkyard engine *IF* you can find one (have only seen one
PRV. 99% of junkyard Volvo's have the inline 4). Would look slightly
unfinished with extra unused belt groove. Plus one on my spare engine
has rusted badly. If I can afford a DeLorean, I can afford a new
aluminum pulley...

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "John Hervey" <john@xxxx> wrote:
> Bill, Do you mean with the 4 bolt pulley mount.
>
>   -----Original Message-----
>   From: content22207 [mailto:brobertson@xxxx]
>   Sent: Monday, December 15, 2003 10:04 PM
>   To: DMCForum@xxxxxxxxxxxxxxx
>   Subject: [DMCForum] Re: Autozone B27/B28 Water Pump
>
>
>   Autozone is either $79.95 or $89.95 (can't remember which) for water
>   pump w/ fan clutch mount. Unfortunately Darryl's pulley is also $80
>   (S&H), so I won't save any money. Bought for convenience (keep in
>   glove compartment in case pump dies on the road) and for beauty --
>   whenever I replace will look better than factory original.
>
>   Not that a pretty pulley makes the car any faster or more reliable...
>
>   Bill Robertson
>   #5939
>
>   >--- In DMCForum@xxxxxxxxxxxxxxx, "John Hervey" <john@xxxx> wrote:
>   > Let me try to help clear this up a little.
>   >
>   > I don't buy my new or rebuilt pumps from Rob. He has his source and
>   I have
>   > mine. But, They all come from the same country. ( Italy.)
>   > I buy brand new pumps in quantity and remove nothing. All I do is
>   press on
>   > the pulley. If you don't like the 1" over hang we can cut that off,
>   but if
>   > you ever need to turn the engine a bit without cranking you can put
>   a monkey
>   > wrench on it and press down on the belt and you can turn the engine.
>      (
>   > Bill, You know what I mean.)
>   > If you buy it from Volvo, take a a towel with you for the price.
All the
>   > other AutoZone's and places are normally $20.00 to $50.00 higher
>   than I am.
>   >  It's normally better if you have the old pulley on the pump is to
>   buy a new
>   > pump with the new pulley already pressed on. Then if something
>   happens when
>   > pressing it on, we buy it instead of you. After the first install of
>   the new
>   > pulley, it will come off easier and press on to a newer pump easier
>   later
>   > on.
>   > I try to pass on lower prices without sacrificing quality with my
>   products
>   > due to overhead.
>   > John
>   >
>   >
>   >   -----Original Message-----
>   >   From: content22207 [mailto:brobertson@xxxx]
>   >   Sent: Monday, December 15, 2003 9:16 PM
>   >   To: DMCForum@xxxxxxxxxxxxxxx
>   >   Subject: [DMCForum] Re: John Hervey's Water Pumps
>   >
>   >
>   >   I believe John's just buying stock B27/B28 water pumps,
removing fan
>   >   clutch mount, and pressing on suitable size pulley as Dave
Swingle did
>   >   (note abnormally long shaft protruding). You're paying for
pulley and
>   >   his labor.
>   >
>   >   Volvo water pumps are a stock item at Autozone BTW. Advance is
24 hour
>   >   PDQ.
>   >
>   >   While we're on subject of John Hervey -- prefer his formed
radiator
>   >   hoses over Rob Grady's. Are a little bit thicker and fit better.
>   >
>   >   Bill Robertson
>   >   #5939
>   >
>   >   >--- In DMCForum@xxxxxxxxxxxxxxx, Mark Valuch
<dmcvin6683@xxxx> wrote:
>   >   > Ok here is what i see..
>   >   > PJ Grady
>   >   > pump only $175.00
>   >   > pump and pulley $229.75
>   >   >
>   >   > specialtauto...
>   >   > Pump only $119.95
>   >   > pump and pulley $198.95
>   >   >
>   >   > So if John Hervey buys his pumps from PJ Grady he is loosing
money
>   >   > selling them so such a lower price. Also i did not know that PJ
>   Grady
>   >   > is the only source for Volvo water pumps in the U.S. When i
>   bought my
>   >   > water pump from John Hervey he said he gets them locally and
>   Texas is
>   >   > very far from New York.
>   >   >
>   >   > Mark
>   >   >
>   >   >
>   >   > On Monday, December 15, 2003, at 07:47 PM, Martin Gutkowski
wrote:
>   >   >
>   >   > > From John's site
>   >   > >
>   >   > > Brand new water Pumps w pulley installed
>   >   > > $198.95
>   >   > > New $119.95 pump only,
>   >   > >
>   >   > > Makes $79 by my maths. PJ Grady, $78.20 - I guess 80c goes on
>   fitting
>   >   > > it.
>   >   > >
>   >   > > Martin
>   >   > >
>   >   > > Mark Valuch wrote:
>   >   > >
>   >   > > >So he is buying them from PJ Grady and selling them for less
>   >   money and
>   >   > > >offering a 5 year warranty?
>   >   > > >
>   >   > > >Mark
>   >   > > >
>   >   > > >
>   >   > > >
>   >   > > >
>   >   > >
>   >   > >
>   >   > > [Non-text portions of this message have been removed]
>   >   > >
>   >   > >
>   >   > <image.tiff>
>   >   > >
>   >   > >
>   >   > > To unsubscribe from this group, send an email to:
>   >   > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>   >   > >
>   >   > >
>   >   > >
>   >   > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>   Service.
>   >   > Come see all of my Photo's at my Website.
>   >   > http://photos.yahoo.com/snextime
>   >   >
>   >   >
>   >   > [Non-text portions of this message have been removed]
>   >
>   >
>   >
>   >   To unsubscribe from this group, send an email to:
>   >   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>   >
>   >
>   >
>   >
>   >         Yahoo! Groups Sponsor
>   >               ADVERTISEMENT
>   >
>   >
>   >
>   >
>   >
>   >

--------------------------------------------------------------------------
> --
>   > --
>   >   Yahoo! Groups Links
>   >
>   >     a.. To visit your group on the web, go to:
>   >     http://groups.yahoo.com/group/DMCForum/
>   >
>   >     b.. To unsubscribe from this group, send an email to:
>   >     DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>   >
>   >     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>   Service.
>   >
>   >
>   >
>   > [Non-text portions of this message have been removed]
>
>
>
>   To unsubscribe from this group, send an email to:
>   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>
>
----------------------------------------------------------------------------
> --
>   Yahoo! Groups Links
>
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/DMCForum/
>
>     b.. To unsubscribe from this group, send an email to:
>     DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
>     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx




Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated