Re: [DMCForum] Re: Torsion bar allen size is 3/8" - DO NOT USE 10mm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Torsion bar allen size is 3/8" - DO NOT USE 10mm



When you get into hydraulic fittings, we're the oddball in europe in 
still using imperial. Brake flexi hoses however are 10mm bulkhead 
connectors.

Martin (England)

content22207 wrote:

>Already had this discussion in DMCNEWS:
>
>Are a few others:
>Vacuum canister held by 5/16x24
>Sleeve nuts on parking brake cable are 9/16
>I believe brake lines are fractional
>What size are lines to back of A/C compressor?
>
>Bill Robertson
>#5939
>  
>




Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/SIG=12cqeqdoj/M=267637.4116730.5333196.1261774/D=egro
upweb/S=1705126215:HM/EXP=1069459629/A=1853618/R=0/*http://www.netflix.com
/Default?mqso=60178338&partid=4116730> click here	
 
<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupm
ail/S=:HM/A=1853618/rand=966431248> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated